I've been trying to decide if I'll keep the Toyota Sienna
another season or purchase a larger RV.
One issue is having a place where I can stand up and cook
out of the wind and rain and sun.
Another is a place to shower.
I've been looking at Roadtreks and similar small van-type RVs,
but holy hell,
the prices are NUTS!
So I thought I'd try this tent called the Arc Haus.
If you order it on Amazon.com, it comes with THREE zip-on doors.
Two can be used to make it a stand-alone tent that I can just zip up
if I want to go to town.
The other "door" is actually a sleeve
that fits around the back end of the van, where my kitchen is.
It can go over or under the hatch,
depending on the size of the van, and depending on how high
you make the tent (that part is adjustable).
The tent arrived yesterday and I set it up.
I found both things I loved
and things that weren't so great
and thought I'd share those on a blog.
The tent arrives in two bags.
One holds the tent and one holds the extra sleeve
that wraps around the back of the van.
Opening the tent bag, I find the following:
Green bag with tent stakes and black straps |
ArcHaus Tent and Tent Poles |
At first I was confused about why they sent these, but later I was happy! |
Included was a link to a set-up video, which is worth watching |
Instructions for setting up tent is sewn inside the bag |
Pretty simple to understand |
Also included was a list of pieces |
Setting this up the first time was no more awkward
than setting up any new tent for the first time,
and I didn't really know what I was doing.
The first thing to lay out are these two side bars.
One goes on one side of the van, and the other goes on the other side.
I think after doing this, it's best to lay them out
farther apart than you think they should be,
and then draw them in to fit your van once the entire tent is set up.
For one thing, that makes it easier to get the cover on the frame
because the frame will be shorter.
Once you lay out the side bars,
you snap on the straps which form the base of the frame.
There is a place for this, designated by rubber washers.
After you put those straps on evenly,
then you add the two LONG poles that form the two arches.
THEN, you attach the 5 cross poles,
which come with the same snaps shown on the straps above.
All of the poles are shock corded.
Now it's time to put on the cover,
and here is where it would be nice to have two people.
But I didn't,
and holy hell it was awkward.
What I learned:
Take the two doors completely OFF
before you put the cover on.
They're easily zipped on once the thing is set up.
When I tried putting the cover on alone with the doors attached,
I had to bend the frame in order to get the cover up there.
Doing that, I broke two of the clips straight away.
And now I understood why they included
a package of the more heavy duty clips!
I removed the cheap clips,
inserted the new heavy ones,
and was good to go.
What I learned:
The new heavy clips fit INSIDE the ends of the pole.
Break each pole down, put in the clip,
then holding the pole close to the clip,
put the clip on the ground, and use your body weight,
to push those clips all the way in.
It's difficult.
Be careful not to break the pole or the clip.
If I had to do this again,
I'd grease the clips first with something slippery
so they'd slide in easier.
Even water might work.
The cheap clips broke. Luckily they included more heavy duty ones. |
Once the frame was up again,
and the doors were removed from the cover,
I found it easiest to put the cover in through the CENTER,
then lay it out to each side.
What I learned:
Next time, I'll adjust the bottom straps so the whole thing
is lower, closer to the ground,
then adjust the straps to make it taller
once the cover is on.
The cover went on pretty easy, though.
Each corner of the cover has a tough sewn in place
that you slip over the frame.
Then you wrap the bottom around the side poles,
and snap them in.
On the corners,
you wrap a cord from the outside to the inside,
and there is a hook that holds it.
Then there is a heavy elastic shock cord
that you pull to tighten the whole thing.
There's no way that cover is coming off!
This is how you adjust the WIDTH of the ArcHaus, by tightening these straps. Also, you can see the cord and hook that also holds the cover on the frame. |
with the back hatch open.
What I learned:
I will put some cord or elastic to hold the hatch down a bit
so it doesn't rub against the top of the ArcHause
and tear the fabric. The door is just a wee bit too tall
when it's open all the way.
The ArcHaus COULD be put on
with the door OVER the Haus,
but I wanted to be able to close the hatch at night
if it was cold.
In the hotter weather,
it might work fine to put the open hatch
over the top.
Then you'd be enclose just like you'd be in a tent.
Here is what the sides look without the door
that snugs around the back.
As you can see, there's a space,
and maybe in good weather,
you wouldn't need to put the back piece on,
though I think it would keep it from blowing in a wind.
Here is what it looks like with the tailgate piece zipped on.
It just zips right on, easily.
Hatch open |
As you can see, it goes all the way around.
It's an elasticized opening and even covers the bottom
underneath the van.
Hatch closed |
On the outside, are clips you can put through your tires or ???
to hold the tent tightly to your rig.
The straps and clips seem quite sturdy.
Strap clipped around my tire. |
There are also straps at the top side, which for me,
strapped nicely to the rack on my van.
Strapped to the rack |
I forgot to take a photo of the door, so here is one I found online.
Two of the doors I got look like this one.
You can zip them up tight, or open the screened windows to get airflow.
At night, if the weather is warm,
I can leave the hatch open with these shut,
just like I was camping in a tent.
And if I want to go somewhere,
I don't have to pack up my table and stove and chair.
I can just put the extra door on, and leave the tent standing.
Plenty of room inside for my table, stove, chair, and other storage. |
You can use a tarp, as in the photo above, for the floor.
Or if you have a lot of cash,
you can actually buy a screened insert
that has a floor,
but for me, that's too much to carry around.
Looking out the screened window. |
Once I had it up,
I loved it!
Taking the ArcHause down was simple.
I just unclipped all the clips,
slipped it off the back end,
then unzipped both doors.
I unhooked the cover from the frame,
slid it off and rolled it up.
Everything fit nicely into the sturdy carrying bag,
which has an extra zipper to expand the bag,
for easy repacking.
I managed to get everything into the carrying bag
without a lot of effort.
That was a plus, because as you know
if you tent camp,
getting those things back into the bag
can be a real pain in the butt.
What I learned: It's easier to repack if you FOLD it rather than roll it.
FOLD each piece, including the doors,
and they all stack in there nicely.
I put the poles in their bag on top.
For those of you who would rather fit the ArcHaus
to the side door, it can be done.
And there is a special ArcHaus
made just for taller rigs.
They even make one that fits on a trailer.
So that's it.
All in all I think I'll be very happy with this ArcHaus.
It remains to be seen how it will hold up
in the winds of Quartzsite,
but there are tie-downs
and I think it it's well-staked, it should be fine.
Negatives:
There are only a couple of negatives,
and for me they weren't deal-breakers.
1) The cheap clips that broke. Luckily, they included heavy duty clips and those appear to hold up fine.
2) Not so easy to set up with one person, but that could be just because I'd never done it before. I expect the next time to be a lot easier.
Positives:
1) I can cook and sit out of the wind, rain, sun.
2) I don't have to leave my table, stove, and propane out when I go to town.
3) I can leave the hatch open in hot weather and not worry about bugs
4) I can SHOWER in this tent, which means one less thing to carry around. I can get rid of the pop up shower tent.
4) I can SHOWER in this tent, which means one less thing to carry around. I can get rid of the pop up shower tent.
5) Pretty inexpensive. I purchased this on Amazon.com for $300.
That's a heck of a lot cheaper than
buying a Roadtrek,
and if I decide to move forward on a larger RV,
I can include this tent in the price of the Sienna.
I'll report back once I've actually used this.
I hope this helps some of you make a decision.
Happy vanning!
Annie
I wish to comment on what could be done with the antique items, old photos and genealogy. All flat items such as photos, and genealogy can be scanned. I have a scanner of the type that would work. It's a portable scanner called Vupoint. You can google it. Then if you need slides and negatives scanned, Vupoint also makes a scanner for those. In both cases, the images are digitized and are stored on an SD card. Your computer should have a card reader. I believe they may have a usb cord. You can view your images anytime. There other brands of both types of scanners, these are the ones I have. The three-dimensional items could be photographed and digitized. Then given to your relatives or a local museum. I plan on using some images in scrapbooks. There are also digital ways to make scrapbooks online. Or use as inspiration for art. One piece I own is a Singer treadle sewing machine from @ 1916. I plan to photograph it, print and design a scrap book page. My sister gets the machine after. Good luck, I hope all of this helps.
ReplyDeleteKick ass post!!
ReplyDeleteany update on how this panned out? do you use it alot? or did it turn out to be more hassel than it's worth?
ReplyDeletethanks